Untranslated

More Language

Home
About Us
Products
News
Download
Send Inquiry
Contact Us

+86-574-87527771

kaxite@seal-china.com

Sitemap | RSS | XML

> News > Company News

NEWS

Company News
Industry News
Industries & Applications

New Products

Pipe Thread Sealing Cord
PTFE Porous Membrane
Expanded PTFE Gasket
Expanded PTFE Spiral Wound Gasket Filler Material
Expanded PTFE Valve Stem Packing

All new products

Company News

The following is about Company News related, I hope to help you better understand Company News.

Join Our Newsletter

Nav

Home
About Us
Products
News
Download
Send Inquiry
Contact Us

Contact Us

Address: No.432 Zhenhai Middle Road, Luotuo Street, Zhenhai District,Ningbo City,Zhejiang,China
Phone: +86-574-87527771
E-mail: kaxite@seal-china.com
Fax: +86-574-87527773

Latest News

Gasket Seating2017/10/31
There are two major factors to be considered with regard to gasket seating. The first is the gasket material itself. The ASME Unfired Pressure Vessel Code Section VIII, Division 1 defines minimum design seating stresses for variety of gasket materials. These design seating stresses range from zero psi for so-called self-sealing gasket types such as low durometer elastomers and O-rings to 26,000 psi to properly seat solid flat metal gaskets. Between these two extremes there are a multitude of materials available to the designer enabling him to make a selection based upon the specific operating conditions under investigation. Table 1 indicated the more popular types of gaskets covered by ASME Unfired Pressure Vessel Code.
Installing Grafoil Crinkle Gasket Tape2017/10/31
1. Brush off any rust or foreign particles. Wipe flange surface thoroughly with a rag soaked in acetone or other suitable solvent to remove grease or oil. 2. Insert fingernail between the paper backing strip and the tape and strip the paper back three to six inches. Draw a reference line in flange and press squared off end of tape against it.
Effecting a Seal2017/10/31
A seal is affected by compressing the gasket material and causing it to flow into the imperfections on the gasket seating surfaces so that intimate contact is made between the gasket and the gasket seating surfaces preventing the escape of the confined fluid. Basically there are four different methods that may be used either singly or in combination to achieve this unbroken barrier.
Spiral wound gasket production process and equipment2017/10/31
In the present seal, metal spiral wound gasket with excellent elasticity, high temperature, high pressure,low temperature and other characteristics, has become a very wide range of applied seal. Especially suitable for uneven loading, relaxation and easy access together, cyclical changes in temperature and pressure of the occasion, is the main flange gasket. In the petrochemical pipelines, mechanicalseals,shipbuilding,metallurgy, aerospace and other industries widely.
How to Cut Gasket material?2017/10/31
Clean radius and straight cuts are achievable on gasket material with the proper tooling. Thinner types of gasket material require nothing more than sharp blades and hollow gasket cutters. Gasket material over 1/4-inch thick require specialized mechanical tools to create the precision cuts necessary to seal a piece of equipment and is best left to professionals. Properly securing the gasket material and ensuring the tools used are in good condition will allow you to cut thinner gasket material efficiently and precisely.

Copyright @ 2015-2022 Ningbo Kaxite Sealing Materials Co., Ltd. All Rights Reserved. Links | Sitemap | RSS | XML | Privacy Policy

LiveChat关闭